Wash dyed bottoms on their own the first time, in cold water, and expect some colour in the water. Skip that step, and a fresh shade can end up on your white clothes.
It is an easy step to skip. A new outfit feels like it should simply be washable. But a freshly dyed piece can still release loose dye, and the early washes are where most trouble starts.
Why Does a Dyed Bottom Bleed or Fade?
Iowa State University Extension explains two problems. Bleeding is loose dye leaving the fabric in the wash. Fading is the slow loss of colour through wear, friction and care.
Here is what it says about each one.
- Bleeding: if a garment is tagged “wash separately”, expect the dye to bleed. Wash it alone the first time and note what you see in the water.
- Fading: friction, bleach and light all add to it. It is more of a problem with natural fibres such as cotton, wool and silk than with synthetics.
So the plan is simple. Wash alone at first, keep the water cold, and avoid bleach and strong sun.
How Do You Wash Dyed Bottoms the First Time?
Follow these seven steps.
- Ask your dyer first. Dyes differ, so their advice for their own dye comes first.
- Wash it alone. Never mix it with your other clothes.
- Use cold water. Iowa State advises cool or cold water to keep fading to a minimum.
- Use a mild detergent. Skip bleach and strong stain removers.
- Check the water. Is it clear, lightly tinted or dark?
- Dry in the shade. Avoid the tumble dryer, which can pass colour to the drum, and avoid strong sun.
- Repeat. Wash it alone again until the water stays clear.
Keep a first-wash log
This is the habit we suggest to every customer. After each of the first washes, write one line in your phone: the date and the colour of the water. A clear log tells you when the piece is ready to join your normal laundry. It also gives you something concrete to show your dyer if the colour keeps running.
What Should You Ask Your Dyer About Care?
Ask these five questions at pickup.
- Which dye did you use for this fabric?
- Should I wash it alone, and for how many washes?
- Is cold water enough, or is warm fine?
- Do you use a fixative on it?
- Can I iron it, and at what heat?
How Do You Wash Dyed Bottoms After the First Few Washes?
Once the water runs clear, switch to a gentle routine.
- Wash with like colours. Iowa State says this is the only way to prevent colour transfer.
- Keep using cool or cold water.
- Skip bleach.
- Dry away from strong sunlight.
- Follow any care tag your dyer gives you.
How Do You Care for a Pleated Farshi or Sharara?
Pleated pieces hold their shape best with a little care. Iron them on the reverse side at medium heat, and hang or fold them loosely. This keeps the pleats crisp and avoids shine on the surface.
Our own pieces include a White Farshi Shalwar and White Sharara Pants. Both are wide and pleated, so they reward a gentle routine.
What Is a Dye Fixative, and Should You Use One?
Iowa State notes that dye fixatives such as Retayne and Rit ColorStay reduce colour bleeding in cotton. They are used before the first laundering. However, do not add any product without asking. Ask your dyer whether they use one, and follow their advice.
Which Mistakes Spoil a Dyed Bottom?
- Washing it with whites. Loose dye can stain them.
- Using hot water. It makes dye release more likely.
- Using bleach. It adds to fading.
- Drying in strong sun or a tumble dryer. Light fades colour, and the dryer can pass colour to the drum.
- Skipping the dyer’s advice. Your dyer knows their own dye.
Results depend on the dyer and the dye, so none of this replaces their advice. To plan your next dye job, read How to Dye a White Shalwar to Match Your Shirt and How Much Does It Cost to Dye a Shalwar in Pakistan?
Shop the Look: Bottoms Worth Caring For
Every piece below arrives in plain white and is dyeable.
White Farshi Shalwar
Wide, pleated and floor-length.
White Sharara Pants
A flare from the waist with no knee seam.
White Gharara Pants
Fitted to the knee, then a wide gathered flare.
White Culottes Pants
Wide, straight and cropped.
FAQ: Wash Dyed Bottoms
How do I wash dyed bottoms the first time?
Wash them alone in cold water with a mild detergent, and look at the colour of the water. Dry them in the shade. Repeat separate washes until the water stays clear.
Why does my dyed shalwar bleed?
Loose dye comes out in the early washes. Iowa State Extension says that when a garment is tagged “wash separately”, you should expect the dye to bleed.
Can I wash dyed bottoms with other clothes?
Not at first. Later, wash them with like colours, because washing like colours is the only way to prevent colour transfer.
Does cold water really help?
Yes. Iowa State Extension advises cool or cold water to keep fading to a minimum.
How do I stop a dyed shalwar from fading?
Follow your dyer’s care advice, use cold water, and avoid bleach and strong sunlight. Friction also adds to fading, so wash gently.
Can I use a dye fixative?
Fixatives such as Retayne or Rit ColorStay are sold to reduce bleeding in cotton, according to Iowa State Extension. Ask your dyer before you use any product.
Planning a Dye Job?
Message us on WhatsApp: 03394011360 with the colour you have in mind, and we will tell you what to ask your dyer. You can also visit our contact page or browse the shop.









