Woman showing how to measure yourself for bottoms with a soft tape and a notebook

Measure Yourself for Bottoms: A Style-by-Style Guide

Measure yourself for bottoms before you order, because a size chart is useless without your own numbers.

A label such as “medium” means different things at different shops. Your tape does not change. So take five measurements once, write them down, and use them every time you shop online. It takes about ten minutes, and it saves you a return.

What Do You Need Before You Start?

Gather four things.

  • A soft tape measure, not a metal one.
  • A notebook or a notes app on your phone.
  • Light, close-fitting clothes, so you measure your body and not your outfit.
  • A friend, for the length measurements that are hard to take alone.

Stand straight and relax. Do not pull the tape tight, and do not hold your breath.

How Do You Measure Yourself for Bottoms?

Follow the points in New Mexico State University Extension’s pants guide. It lists the measurements below.

  1. Waist. Measure the smallest part of your waist. NMSU suggests leaving the tape tied snugly there while you take other measurements.
  2. Hip. Measure around the fullest part of your hips and seat. Keep the tape level.
  3. Thigh. Wrap the tape around your thigh, just below the crotch. This matters for fitted styles.
  4. Length. Measure from your waist down the side of the leg to the length you want.
  5. Your event shoes. Wear the shoes you will wear with the outfit when you measure length, because heels and flats change the hem you need. Our guide Which Bottoms Suit Your Height? explains why.

Take every number twice. If the two do not match, take a third.

Which Measurements Matter for Each Style?

This is the part most size guides skip. Different silhouettes need different numbers. The table is our guidance, so check each product page for its own measurements.

StyleMeasure theseWhy
FarshiWaist, hip, waist to floorA floor-length hem needs an exact length
ShararaWaist, hip, waist to floorA flare from the waist needs the right hem
GhararaWaist, hip, waist to knee, waist to floorThe knee joint should sit at your knee
CulottesWaist, hip, waist to where you want the cropThe crop point decides the look
Bell bottomWaist, hip, thigh, waist to floorThe cut is fitted to the knee, so thigh matters

Why Should You Measure a Pair That Already Fits?

It is the easiest check of all. Size.ly’s pants guide describes it. Lay a pair you love flat and fastened. Measure across the waist, hip and thigh, then double those numbers to get a body circumference. Leave the length as a single run.

Then compare these numbers with the seller’s chart. If the chart’s waist, hip and length are close to your trusted pair, you can order with more confidence.

One nuance applies to shalwars. If the waist has elastic or a drawstring, it can stretch or tighten, so ask the seller which waist measurement the chart shows. Check the product page, or ask us.

What If You Are Between Sizes?

Start with your hip. Made by Rae’s pants guide says to choose the size from the hip measurement, then check your waist. If your waist puts you in a larger size, use the larger one.

Then check the length. A size that fits your hip but ends too short is still the wrong size.

[INSERT: your real garment measurements for each product and size, including waist, hip, length and hem width.]

What Should You Ask a Seller Before You Order?

A size label is not enough. Ask these seven questions.

  • What are the garment measurements for each size?
  • Is the waist elastic or a drawstring?
  • What is the full length from waist to hem?
  • How wide is the hem?
  • Is the fabric pre-shrunk, and may it shrink after dyeing and washing?
  • Which measurement does the chart show, waist stretched or relaxed?
  • Can I send my numbers and ask which size you suggest?

If you plan to dye, remember that dyeing involves washing. Our guide Wash Dyed Bottoms Without Fading explains the first washes, and How to Dye a White Shalwar to Match Your Shirt covers the dye day.

[INSERT PHOTO: a real photo of a customer or team member measuring with a soft tape.]

Which Mistakes Ruin a Measurement?

  • Measuring over thick clothes. You measure the clothes, not you.
  • Pulling the tape tight. A tight tape gives numbers that are too small.
  • Measuring the hip too high. Find the fullest part of your hips and seat.
  • Using the wrong shoes for length. Wear your event shoes.
  • Ordering by the label alone. Always compare garment measurements.
  • Forgetting to write the numbers down. Keep them in your phone for the next order.

Shop With Your Numbers

Every piece below arrives in plain white and is dyeable. Check each product page for its measurements.

White Farshi Shalwar

Wide, pleated and floor-length. Compare your waist-to-floor number.

White Sharara Pants

A flare from the waist with no knee seam.

White Gharara Pants

Fitted to the knee, then a wide gathered flare. Compare your waist-to-knee number.

White Culottes Pants

Wide, straight and cropped. Choose where the crop lands.

White Bell Bottom Pants

Fitted through the hips and thighs, then flared from the knee.

Shop Eastern Bottoms or Shop Western Bottoms

FAQ: Measure Yourself for Bottoms

How do I measure myself for bottoms?

Use a soft tape and light clothes. Measure your waist at its smallest part, your hips at their fullest part, your thigh just below the crotch, and the length from your waist to where you want the hem. Write each number down.

Where do I measure my waist for bottoms?

Measure the smallest part of your waist, which is your natural waistline. Keep the tape level and snug, but do not pull it tight.

Which measurement matters most for bottoms?

Many fitting guides choose the size from the hip measurement, then check the waist. Length also matters for long styles such as a farshi or sharara.

How do I choose between two sizes?

Start with your hip. If your waist suggests a larger size than your hip does, use the larger size, then check that the length suits you.

How do I measure the length for a farshi or sharara?

Wear your event shoes, and measure from your natural waist down to the floor. Compare that number with the product’s length.

Should I measure a pair that already fits?

Yes. Lay it flat and fastened, measure across the waist, hip and thigh, and double those numbers. Then compare them with the seller’s chart.

Not Sure About a Number?

Message us on WhatsApp: 03394011360 and ask. You can also visit our contact page or browse the shop.

Add a Comment

Your email address will not be published. Required fields are marked *